Everything in the base monitor, plus eight 50 A sensors — so you can see eight individual circuits separately, not just your total load.
What the eight sensors add
The base model tells you how much. These tell you what.
Eight 50 A clamp-on sensors go onto the branch circuits that matter most — the AC plant, the compressor, the pumps, the lift, the kitchen, the guest floor. Each appears as its own line in the app, with its own consumption history and its own alert threshold.
In most installations eight is the point where monitoring stops being interesting and starts being useful: enough to cover everything that draws serious power, with the remainder shown as “Balance”.
Choosing between 8 and 16: count the circuits you would actually act on. Under eight, take this model. Multiple production lines, floors or blocks to separate — take the 16-sensor model; retrofitting later costs more.
In the box
Vue Gen3 energy monitor (EMV3-A)
Three 200 A main CT sensors (22 mm aperture)
Eight 50 A branch CT sensors (10 mm aperture)
4-wire voltage-sense harness
Wi-Fi antenna and cable
Extra wire and wire nuts
Quick-start guide and circuit labels
Not included: Ethernet cable, DIN-rail mounting screws (2 × M3 with lock washers).
Key specifications
Supported supply: 3-phase 4-wire “Y” (star, TN/TT), 240 V phase-to-neutral · Delta not supported
Maximum per phase: 200 A (~144 kVA total)
Accuracy: ±2% · 1-second live data
Measurement category: CAT IV (200 A ports), CAT III (50 A ports)
Solar / net metering: supported — branch sensors on the inverter output, bi-directional mode in the app
Certifications: Safety UL 61010, UL 2808 · EMC FCC, ISED, CE, PSE, UKCA
Warranty: 1 year, handled by us in Kolkata
Subscription: None. The app is free permanently.
Check before you order: each phase conductor must pass through the main sensor's 22 mm aperture, insulation included; branch conductors through 10 mm. Installation by a licensed electrician.
GST invoice with every order. Sold and supported in India by GenConnect Marketing Services LLP, Kolkata — authorised Emporia distributor. WhatsApp +91 98310 37220.
Installation — what to check first
A licensed electrician fits it inside your existing board in 45–90 minutes. No wire is cut. Check three things first: a 22 mm clamp closes around each incoming phase cable; three spare single-pole MCB ways; internet at the board (2.4 GHz Wi-Fi or Ethernet). Installation page and official guide →
Warranty, returns & support
One-year warranty serviced by GenConnect in Kolkata — not shipped overseas. Returns as per our published returns policy. Support on WhatsApp +91 98310 37220 from people who know the product and Indian boards.
Verified reviews left on this store by owners of the previous-generation Vue. Same sensors, same app — the Gen3 adds Ethernet and a smaller body.
★★★★★
“Very pleased, we now know exactly the consumption from our Factory. My electrician fitted the unit and it was easy to set up the wifi connection. The reports are brilliant.”
Vikas Kumar3-phase with 16 sensors · factory
★★★★★
“The 3 phase model with three input CTs is suitable for most installations in India. Good product quality, easy to install, easy to setup and gets up and running within an hour.”
Jitendra Mahapatra3-phase with 16 sensors
★★★★★
“As an electrical consultant it was easy to install. Would not fit in DP Box, so had to mount a box for it to fit in. Works well and has helped me cut down on some energy usage. The app is good and easy to use.”
NagarjunaElectrical consultant · 3-phase with 16 sensors
7 reviews · average 4.9/5 · collected via Judge.me, 2021–2023. Shown unedited.
Complete the kit
Sensors and spares for the Emporia Vue Gen3. Gen3 parts only — Gen3 uses screw terminal connections; Gen2 used 3.5 mm plug connectors. The two generations' sensors are not interchangeable in either direction.
Delivery in 2 Days
Currently Unavailable
